TEXALAN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

Make sure this fits by entering your model number.
[APPLICATION]: The 1.26-inch (32 mm) and 1.42-inch (36 mm) fan clutch wrench kits with fan pulley fixing tool remove the lock nut of the thermally viscous fan that changes with temperature, the fixing rod fixes the water pump pulley in place and loosens the radiator fan at the same time.
[SUITABLE FOR YOUR VEHICLE]: Compatible with engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54; the bar has 3 holes of 0.5inch (13mm) in diameter and 1 hole of 0.94 x 0.47inch(24x12mm), 1PC 1.3 x 0.43inch(33x11mm) and 1PC 1.5 x 0.98inch(38x25mm) semi-circular groove.
[DURABILITY]: Made of 0.2 inch (5 mm) thick vanadium steel, it has maximum strength and service life. 12.5 inches (31.8 cm) long clutch fan removal tool handle can reduce user fatigue
[EASY TO USE]: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 1.26inch (32mm) or 1.42inch (36mm) (both included) spanner to undo nut; If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, remove bolts and reinstall over bar.
[SET INCLUDE]: 1PC 1.26-inch(32mm) spanner; 1PC 1.42-inch(36mm) spanner; 1PC pulley bar.