Pit Posse H D Clutch Spring Compressor Tool

Pit Posse’s clutch spring compressor tool is the perfect tool for installing or releasing plates and replacing your clutch.

To get your clutch plates out you must get the inner spring compressed, and the snap rings taken out

It’s important to follow the instructions since there’s a compressed spring in the clutch and you need to gradually work your way to release the pressure.

Note: For 91-05 XL applications, please use the included compressor nut, all other Models will not need this part. Please refer to service manual for removal of the outer cover.

Instructions:

1. Loosen jam nut and remove adjusting screw and adjuster nut

2. Hold cup side of tool up against the clutch diaphragm

3. Slip bolt through the hole in the top of the tool with nut almost to the end of the hex head, with a washer in front of the nut. PLEASE APPLY OIL TO THREADS AND WASHER

4. Thread bolt into the hole in the release plate at least 5 turns

5. While holding bolt from turning, turn the nut with washer against the tool. Compress the diaphragm spring inward enough to remove the retaining ring

6. Remove retaining ring

7. Slowly remove tool with pressure plate attached. DO NOT LOOSEN SPRING COMPRESSOR TOOL IF YOU ARE NOT REPLACING THE PRESSURE PLATE.

8. Clutch can now be removed

Note: For 91-05 XL applications, please use the included compressor nut

1. Remove O-ring from adapter tool.

2. Install adapter tool with washer through the hole in the top of the clutch spring compressor.

3. Install O-ring on the underside of the clutch spring compressor.

4. The tool is now ready for use!

Make sure this fits by entering your model number.
SAFELY RELEASE THE PRESSURE PLATE OF YOUR CLUTCH- Take the clutch nuts and plate off without danger using Pit Posse’s clutch spring compressor tool.
REMOVE AND INSTALL RETAINER RINGS FOR CLUTCH REPLACEMENT-The clutch spring compressor is designed to compress the return spring relieving the pressure off the snap ring.
SMART VERSATILE DESIGN FOR YOUR CONVENIENCE- The clutch spring compressor tool is made from billet aluminum, simple to use and guaranteed to fit.
SAVE TIME AND MONEY AND REPLACE YOUR CLUTCH EASILY- A high-quality tool with an open design that makes it much easier to remove the spring clip.
YOUR SATISFACTION IS OUR NUMBER 1 PRIORITY- Pit Posse takes pride in offering tools and solutions for your clutch needs. We offer a Lifetime warranty.